- Home
- Products
- Rubber Products
- Cerac Hoses
Cerac Hoses
- Rubber Products
- Hoses
Ultra abrasion-resistant hose made of ceramic.
Applications
• For powder piping made of resin, wood, metal, non-ferrous metal, etc.
Features
F type (20A to 40A)
Because only the ceramic part comes in contact with powder, there is an extremely low risk of foreign matter contamination.
One side has a loose flange to prevent uneven wear.
S type (50A to 125A)
• Features
Because only the ceramic part comes in contact with powder, there is an extremely low risk of foreign matter contamination.
One side has a loose flange to prevent uneven wear.
Standard specifications
| Part name | Max. pressure range (MPa) |
Standard length (mm) |
Min. bend radius (mm) |
Reference values | ||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Bend counterforce (kg) |
Estimated weight | Max. displacement | Hose outer dia. (mm) |
|||||||
| Hose (kg/m) |
Fitting (kg/piece) |
Stretch (mm) |
Shrinkage (mm) |
|||||||
| F Type | 20A | -0.1 to 1.0 | 720 | 450 | 7 | 3.5 | 1.2 | * | * | 50 |
| 25A | 〃 | 830 | 500 | 8 | 4.7 | 2.1 | * | * | 56 | |
| 32A | 〃 | 950 | 600 | 10 | 5.5 | 2.8 | * | * | 63 | |
| 40A | 〃 | 1,060 | 650 | 12 | 5.7 | 2.9 | * | * | 69 | |
| S Type | 50A | 〃 | 900 | 420 | 16 | 10.0 | 3.5 | 20 | 20 | 101 |
| 65A | 〃 | 1,150 | 560 | 18 | 13.0 | 4.5 | 20 | 20 | 117 | |
| 80A | 〃 | 1,400 | 710 | 20 | 16.0 | 5.0 | 15 | 15 | 130 | |
| 100A | 〃 | 1,780 | 950 | 28 | 24.0 | 5.5 | 15 | 15 | 167 | |
| 125A | 〃 | 2,270 | 1,250 | 30 | 27.0 | 8.5 | 10 | 10 | 200 | |
1. Japanese Industrial Standards JIS10K flanges at both ends are standard (one is loose, outlet side).
2. The standard length is the minimum length that can be bent 90 degrees as a bent pipe.
3. The maximum temperature at which the hose can be used is 70°C.
4. Please inquire separately if you would like specifications other than those mentioned above (special lengths, flanges, pressure capabilities, etc.).
5. For product improvement purposes, the above mentioned specifications are subject to change without notice.
6. Lengths that can be manufactured:
Min. 80A or less, 300L; 100A or more, 500L
Max. 20A, 2800L; 25A or more, 3300L
The F Type is structurally difficult to stretch and shrink, and displacement is obtained by bending.
Inquiries
We welcome questions and comments on any of our products and services.
Please contact the receptionist below for any questions.
* Exportable Products/Foreign countries have been limited. Please take note that we may not accept all your inquiries, in some case.
MAIL: